|
Learn about the technologies behind the Internet with The TCP/IP Guide! |
|
NOTE: Using robot software to mass-download the site degrades the server and is prohibited. See here for more. Find The PC Guide helpful? Please consider a donation to The PC Guide Tip Jar. Visa/MC/Paypal accepted. |
| View over 750 of my fine art photos any time for free at DesktopScenes.com! |
[ The PC Guide | Troubleshooting and Repair Guide | The Troubleshooting Expert | Troubleshooting Specific Components | Troubleshooting the Motherboard and System Devices | Physical Issues ] One of the pins on the motherboard is bent Explanation: One of the pins that makes up one of the connectors or headers on the motherboard is bent.Diagnosis: This is usually a manufacturing defect, or is caused by rough handling or abuse of the motherboard. The pins are malleable and it is usually possible to correct the problem.Recommendation: With the power to the motherboard disconnected, examine the bent pin carefully. Using a pair of needle-nose pliers, grasp the end of the pin firmly. Slowly, slowly, bend the pin back into the correct position.
|
Note: There is always a
chance that a bent pin will break off. This may be unavoidable, especially if the pin has
been bent severely. Generally, I have found that the chances of breakage increase
dramatically when the pin has been bent more than 45 degrees. If it has been bent 90
degrees and you can straighten it without breaking it, well done! :^)