[ The PC Guide | Troubleshooting and Repair Guide | The Troubleshooting Expert | Troubleshooting Specific Components | Troubleshooting Floppy Disk Drives | Errors ]

• The first step to try is to clean the drive. Consistent errors can be caused by dirt or debris on the heads.
• Test to see if the drive is having problems reading all types of disks, or only disks that it did not format. If the drive will read disks that it formats consistently, but will not read disks formatted on other drives, this implies an alignment problem; the drive's tracks are not lined up with where they should be, but if this incorrect alignment is used when formatting then the alignment problem will be masked (until you take the disk to a different PC). You will probably want to replace the floppy drive.
• It is possible that the floppy disk cable has come loose or that there is another similar physical problem, which you may want to double-check.
• Make sure the floppy drive types are properly set up in the system BIOS.
• Try replacing the floppy disk drive with another and see if the problem goes away; it usually will. If it doesn't, you need to troubleshoot the floppy disk controller.

Home  -  Search  -  Topics  -  Up