Learn about the technologies behind the Internet with The TCP/IP Guide!
NOTE: Using robot software to mass-download the site degrades the server and is prohibited. See here for more.
Find The PC Guide helpful? Please consider a donation to The PC Guide Tip Jar. Visa/MC/Paypal accepted.
View over 750 of my fine art photos any time for free at DesktopScenes.com!

[ The PC Guide | Troubleshooting and Repair Guide | The Troubleshooting Expert | Troubleshooting Specific Components | Troubleshooting Floppy Disk Drives | Errors ]

I am getting a "Not ready reading drive" error trying to use the drive

Explanation:

 While attempting to access the floppy disk, you get an error stating that the drive is not ready.

Diagnosis:

 The most common cause of this problem is simply trying to use the drive with no disk in it. It can also be caused by a problem with the drive itself or a bad disk.

Recommendation:
  • Make sure that there is a disk in the drive and that for a 5.25" drive, the drive door is closed.
  • Make sure the floppy drive types are properly set up in the system BIOS.
  • Try a different disk and see if the problem goes away. If it does, then the disk you have is damaged or unformatted.
  • If the problem persists for multiple disks then the drive has a problem of some sort. Troubleshoot it here.

Home  -  Search  -  Topics  -  Up

The PC Guide (http://www.PCGuide.com)
Site Version: 2.2.0 - Version Date: April 17, 2001
© Copyright 1997-2004 Charles M. Kozierok. All Rights Reserved.

Not responsible for any loss resulting from the use of this site.
Please read the Site Guide before using this material.